How To Use The Path Blur In Photoshop To Add DYNAMIC Blurs

22.2K views 777 likes 72 comments

Jump to a step in the video (4)

Click a time to play the video from there.

  1. 0:00 Introduction
  2. 0:52 Extracting the Subject
  3. 2:47 How The Path Blur Filter Works
  4. 4:35 Applying the Dynamic Blur To the Soccer Player
Show Shortcuts for
Text size
Appearance

Your choices stick across every tutorial on this device.

The Path Blur in Photoshop adds motion blur to an image along paths that you draw, so a still photo looks like it is moving.

The Path Blur filter is one of the filters in the Blur Gallery. You control the shape of each blur and how strong it is.

It solves a common problem with action photos. The camera froze the moment, but you want the viewer to feel the motion of an arm or a leg.

This is a stylized effect that works great on composites and poster designs. It is a good fit for beginners, because you only need a rough selection.

In this tutorial, you will add motion to a soccer player kicking a ball. By the end, you will be able to draw curved blur paths, set their speed, and mask the blur in exactly where you want it.

The video was recorded in Photoshop 2019 (version 20.0). The Path Blur has been part of Photoshop since 2014, and it still works the same way in the current version.

Key Takeaways

  • Convert the layer to a Smart Object before you add the Path Blur. The blur then becomes a Smart Filter that you can edit at any time.
  • The Speed slider controls every path at once. The End Point Speed slider only controls the end point you have selected.
  • Setting the End Point Speed to zero puts all the blur at the start of the path, which is where the fastest motion should be.
  • Start each path where the motion is fastest, such as a swinging hand or a kicking foot, and end it on the body.
  • Your selection does not need to be precise. You will hide most of the blurred layer with a layer mask anyway.
  • Edit > Fade lowers the strength of your last brush stroke on a layer mask, which turns that white stroke gray.

What You Will Learn

  • How to make a quick selection of a subject and put it on its own layer.
  • How to open the Path Blur and use its start point, end point and center point.
  • How to draw several blur paths that follow the motion of a subject.
  • How to choose between the Basic Blur and Rear Sync Flash modes.
  • How to paint the blur back in with an inverted layer mask.
  • How to soften a brush stroke with the Fade command.

Requirements

Before you start

  • Photoshop 2019 (version 20.0 or later) or the current version.
  • The Path Blur itself works in every release since 2014.
  • The Select Subject step needs Photoshop 2018 (version 19.1) or later.
  • A photo of a subject in motion, such as an athlete or a dancer.

Path Blur in Photoshop Keyboard Shortcuts

ActionWindowsmacOS
Subtract from a selectionAlt-dragOption-drag
Duplicate a layer (or the selection to a new layer)Ctrl JCommand J
Add an inverted (black) layer maskAlt-click the Layer Mask iconOption-click the Layer Mask icon
Delete the selected blur pathBackspaceDelete

Step 1: Select the Subject

Open your image. The first thing to do is select the subject, so you can work on him separately from the background.

For this effect, you do not need to be very precise. You have two quick options.

  • Pick the Quick Selection Tool and click and drag over the subject.
  • Click the Select Subject button. Photoshop’s AI finds the subject of the image and selects it for you.

Select Subject does a really good job, but it can miss a few spots. In this image, it missed the soccer ball and part of his hair, so add those areas to the selection.

To remove areas that should not be selected, hold Alt (Windows) or Option (macOS) and click and drag over them.

Select Subject needs Photoshop 2018 (version 19.1) or later. To learn more about it, see Select Subject in Photoshop.

Tip: For a cleaner cutout of almost anything, try the two-step method in the Select and Mask Workspace in Photoshop tutorial.

Step 2: Expand and Smooth the Selection

You want the selection to include the entire subject, but you do not want to spend a lot of time fine-tuning it. A small hack helps here.

Go to Select > Modify > Expand. Expand the selection by three pixels and click OK.

The selection is now three pixels larger. It should cover every part of the subject.

Next, click Select and Mask and raise the Smooth setting a little. The black and white view shows your mask, so you can see the edge clearly.

Click OK when the edges no longer look jaggy.

Step 3: Duplicate the Subject and Make It a Smart Object

With the background layer selected and the selection still active, press CtrlJ (Windows) or CommandJ (macOS) to copy the selection to a new layer.

The subject now sits on his own layer.

Right-click the new layer and choose Convert to Smart Object.

A Smart Object lets you apply the blur non-destructively. The filter stays editable, so you can change it later without starting over.

Step 4: Open the Path Blur in Photoshop

Go to Filter > Blur Gallery > Path Blur.

The Path Blur creates motion blurs along a path, and you can draw more than one path.

Photoshop also combines the effect of several paths on the same image automatically. Each new path adds its own motion to the result.

When the filter opens, you see one path by default. The blur starts at one end of the path and ends at the other.

Click and drag on the path, and the blur changes as you drag.

Step 5: Learn the Path Blur Controls

Each path has a few points and two sliders you can work with. The table shows what each one does.

ControlWhat it does
Center pointClick and drag it to curve the path.
End point overlayClick the end point and hover over it to see the overlay. Drag on the overlay to change the end point speed.
Speed sliderSets the overall blur for every path at the same time.
End Point Speed sliderSets the blur at the selected end point only. At zero, that end point has no blur.

The End Point Speed slider in the Blur Tools panel does the same thing as the overlay. When it is set to zero, the blur is strongest at the start point and the end point has no blur.

To draw a new path, click to create a point. Then click again for each new point, and Photoshop blurs the image along that path.

Click the last point you created to complete the path.

To delete a path, select one of its points and press Backspace (Windows) or Delete (macOS). You can also delete the default path and start from scratch.

Step 6: Draw Blur Paths That Follow the Motion

The goal is to bring dynamic motion into the image. Here, you want to see his foot and his arm swinging out as he kicks the ball.

Before you create a path, think about how the blur would actually look. His legs and arms make most of the motion.

Start the first path on his hand and end it on his body. Click the last point to close the path, then click and drag the center point to curve the blur.

Select the end point and bring the End Point Speed down to zero. Most of the speed should be at his hand, since that is the part swinging out.

Do the same thing with his leg. Click, click again, and click the last point to close the path. Curve it, then set its End Point Speed to zero.

With just those two paths, you already have the motion of his arm and his kicking foot.

Tip: Like anything else in Photoshop, the Path Blur takes some fine-tuning. Try an extra path, and if it adds too much blur, select one of its points and press Backspace (Windows) or Delete (macOS) to remove it.

If the overall blur looks too strong, lower the Speed slider until the motion looks natural.

Step 7: Choose a Path Blur Mode

The Path Blur has two blur options.

ModeWhat it does
Basic BlurBlurs the image evenly along each path. This is the mode used in this tutorial.
Rear Sync FlashSimulates a flash fired at the end of an exposure.

Leave the mode on Basic Blur and click OK.

Because the layer is a Smart Object, you are working non-destructively. Double-click the Blur Gallery label in the Layers panel any time you want to edit the blur.

Note: Newer versions of Photoshop add Taper and Strobe settings to the Path Blur. The video does not use them, so you can follow along without them.

Step 8: Mask the Blur Into the Image

Collapse the Smart Filters in the Layers panel so you can work with the layer itself.

Hold Alt (Windows) or Option (macOS) and click the Layer Mask icon. This creates an inverted, black layer mask that hides everything on the layer.

Select the Brush Tool and make sure white is your foreground color. When you paint, you bring the blur back.

Paint only where you want the motion. In this image, that is mainly his legs and his arm.

Tip: Working on a separate layer has another advantage. You can lower the layer’s Opacity if the blur is too strong.

Step 9: Fade the Blur With the Fade Command

You can also paint a white stroke over other parts of the image, then soften that stroke with the Fade command.

Go to Edit > Fade. Lower the Opacity to fade your last brush stroke.

Watch the layer mask thumbnail as you do it. The white stroke turns gray, and that gray controls how visible the blur is.

  • Black hides the blur completely.
  • White shows the blur at full strength.
  • The shades of gray in between show the blur partway.

Adjust the Opacity until the blur looks right, then click OK.

Frequently Asked Questions

Where is the Path Blur in Photoshop?

Go to Filter > Blur Gallery > Path Blur. It is one of the filters in the Blur Gallery, and its settings appear in the Blur Tools panel.

What does the Path Blur filter do?

The Path Blur adds motion blur along paths that you draw on the image. You can curve each path and control how much blur it adds. It works well on action photos, composites and poster designs.

What is the difference between Speed and End Point Speed?

The Speed slider controls the blur of every path at the same time. The End Point Speed slider only affects the end point you have selected. Set it to zero to keep the blur at the start of the path.

How do I delete a path in Path Blur?

Select a point on the path and press Backspace (Windows) or Delete (macOS). Photoshop removes that path. The other paths stay in place.

Can I edit the Path Blur after I click OK?

Yes, if you applied it to a Smart Object. The blur becomes a Smart Filter. Double-click the Blur Gallery label in the Layers panel to change it.

What is Rear Sync Flash in Path Blur?

Rear Sync Flash is the second blur mode in the Path Blur. It simulates the effect of a flash fired at the end of an exposure. The other mode is Basic Blur.

How do I apply the blur to only part of the photo?

Hold Alt (Windows) or Option (macOS) and click the Layer Mask icon to add a black mask that hides the blurred layer. Then paint with white using the Brush Tool where you want the blur. Use Edit > Fade to soften your last stroke.

Conclusion

You now know how to use the Path Blur in Photoshop to add motion to a still photo. You selected the subject, turned it into a Smart Object, drew curved blur paths, and masked the blur in.

This is a stylized effect, so it fits best on a poster or any other type of design. A rough selection and two well-placed paths are all it takes.

Watch the video to see each path being drawn, and comment on the video if you have a question.

Pro Training

Selections and Masking Mastery

Complete course includes 2.5 hours of step-by-step lessons, 6 structured modules, downloadable practice files, and custom Photoshop brushes. Everything you need to master selections and masks in one place.

View the Course

Keep going

Next, use the same filter to create Beautiful Long Shadows in Photoshop.

Final Image

Drag the slider to see before and after

After: How To Use The Path Blur In Photoshop To Add DYNAMIC Blurs
Before: How To Use The Path Blur In Photoshop To Add DYNAMIC Blurs
Jesús Ramirez

About the author

Jesús Ramirez

Jesús Ramirez is a graphic designer and the founder of the Photoshop Training Channel, which he started in 2012 and has grown past two million YouTube subscribers. He has taught at Adobe MAX, Adobe Summit, and Photoshop World, teaches courses for CreativeLive and Pluralsight, and was one of five artists chosen for Adobe Stock's Make a Masterpiece campaign. His Photoshop templates shipped inside Photoshop CC 2018.

More about Jesús Ramirez

Similar Posts